Features
l High temperature resistance: with the high temperature lamination of module, it is easy to peel off without residue
l High strength: the tensile strength of adhesive tape is higher than 100Mpa, which can ensure that it will not break during use
l Hole alignment: uniform hole size and orderly arrangement can ensure that when the adhesive tape is used, the holes are aligned according to the desired position
l Impurity-free:the adhesive tape does not contain any scraps or impurities, ensuring that the modules are not polluted during use
l Versatility: No glue residue will occur on most glass surfaces produces by different factories
..........................................................................................................
Application
l Edge sealing and protection of double-glass solar cell module
..........................................................................................................
Application Guide
l The sticking surface shall be dry, clean and free of grease and dust
l It is recommended to apply a pressure of 1~1.5kg/cm2 to the adhesive tape after sticking
l The ideal bonding temperature for product storage is 18℃~35℃. When the environment temperature is lower than 10℃, it will have a certain effect on the product performance
l The bonding strength will be enhanced as time goes by, and the adhesive performance is basically stable after 24 hours
..........................................................................................................
Storage Condition
The adhesive tape can be stored for one year at room temperature and relative humidity (50~70%). It should avoid direct sunlight, acid and alkaline environment.
..........................................................................................................
Technical Parameters
| Product Specification | |
| Total Thickness | 0.065±0.01mm |
| Width | 30mm (customized) |
| Length | 100m /1000m (customized) |
| Tape Color | Transparent |
| Other Features | Perforated (customized) |
| Technical Indicator | |
| Peel Strength | 6N/25mm↑ |
| Tensile Strength | 100MPa↑ |
| Temperature Resistance | 180℃↑ |